- Order number: S10069
Size | Artikel-Nr. | Preis | Menge |
---|---|---|---|
S10069 | €13.79 * | ||
D= 3mm, l=12mm, L=60mm, S=6mm | S10069.1 | €24.04 * | |
D= 3mm, l=12mm, L=60mm, S=8mm | S10069.2 | €29.24 * | |
D= 4mm, l=15mm, L=50mm, S=4mm | S10069.3 | €15.53 * | |
D= 4mm, l=15mm, L=60mm, S=6mm | S10069.4 | €24.04 * | |
D= 4mm, l=15mm, L=60mm, S=8mm | S10069.5 | €29.24 * | |
D= 5mm, l=17mm, L=50mm, S=5mm | S10069.6 | €18.90 * | |
D= 5mm, l=17mm, L=60mm, S=6mm | S10069.7 | €24.04 * | |
D= 5mm, l=17mm, L=60mm, S=8mm | S10069.8 | €29.24 * | |
D= 6mm, l=22mm, L=70mm, S=6mm | S10069.9 | €25.42 * | |
D= 6mm, l=22mm, L=70mm, S=8mm | S10069.10 | €31.35 * | |
D= 7mm, l=32mm, L=80mm, S=8mm | S10069.11 | €33.45 * | |
D= 8mm, l=22mm, L=70mm, S=8mm | S10069.12 | €31.35 * | |
D= 8mm, l=32mm, L=80mm, S=8mm | S10069.13 | €33.45 * | |
D= 9mm, l=32mm, L=80mm, S=12mm | S10069.14 | €70.50 * | |
D=10mm, l=32mm, L=80mm, S=10mm | S10069.15 | €47.70 * | |
D=10mm, l=32mm, L=80mm, S=12mm | S10069.17 | €70.50 * | |
D=10mm, l=32mm, L=80mm, S=8mm | S10069.16 | €33.45 * | |
D=10mm, l=42mm, L=90mm, S=10mm | S10069.18 | €50.83 * | |
D=10mm, l=42mm, L=90mm, S=12mm | S10069.19 | €74.80 * | |
D=12mm, l=35mm, L=80mm, S=12mm | S10069.20 | €70.50 * | |
D=12mm, l=35mm, L=80mm, S=8mm | S10069.21 | €33.45 * | |
D=12mm, l=42mm, L=90mm, S=12mm | S10069.22 | €74.80 * | |
D=14mm, l=50mm, L=110mm, S=14mm | S10069.23 | €117.82 * | |
D=16mm, l=35mm, L=90mm, S=16mm | S10069.24 | €131.79 * | |
D=16mm, l=55mm, L=110mm, S=16mm | S10069.25 | €145.91 * | |
D=20mm, l=60mm, L=120mm, S=20mm | S10069.26 | €216.98 * | |
D=20mm, l=60mm, L=120mm, S=20mm | S10069.27 | €216.98 * |
Solid Carbide Quadruple Flute Spiral Upcut end mill has 4 positive spiral cutting edges. This tool is made of solid tungsten carbide.
Possible applications of the Solid Carbide End Mill with Quadruple Flute Spiral Upcut:
This Solid Carbide end mill is particularly suitable for milling various plastics and fibre-reinforced plastics. The milling cutter can be used as a slot milling cutter in CFRP (carbon fibre reinforced plastics), GFRP (glass fibre reinforced plastics) just as well as in natural fibre reinforced plastics, which are increasingly used in the automotive industry.
The Solid Carbide Quadruple Flute Spiral Upcut End Mill is also well suited for processing solid wood and board materials. Particularly when milling at high feed rates is required, but very good surface qualities are still required. Also for machines with higher spindle power, but limited speed range, this STC end mill is a real alternative. This end mill can convert the machine power, but the feed rate must not be too low.
When used as a slot milling cutter or for formatting and format cutting, at least two cutting edges of the 4 cutting edges are always in use. This results in the high running smoothness that distinguishes this spiral grooving cutter. The chip is ejected upwards.
The shank of this tool is precision ground with a tolerance of H6. This four-edged Solid Carbide Quadruple Flute Spiral Upcut End Mill is thus designed for professional use in collet chucks, shrink chucks or hydraulic expansion chucks. However, this end mill can not only be used in the CNC machine or the CNC machining centre. The high cutting performance can also be seen when using the hand router or the router.
Technical data of the Solid Carbide Quadruple Flute Spiral Upcut End Mill:
- D = diameter in the working area
- l = maximum milling depth
- L = total tool length
- S = shank diameter
- Made of finest grain solid tungsten carbide
- Cylindrical, smooth shank
- Four - edged, spiral with 4 cutting edges (4Z) upcut
- STC tool for milling in plastics and CFRP (carbon fibre reinforced plastics), GFRP (glass fibre reinforced plastics)
- Finishing cutters also for wood and wood-based materials on slow-running machines
- Also ideally suited for use in CNC machines
- Quality from German production of precision tools Wurzen
- Ground and flank cutting. The face cutting edge geometry with two centre cutting edges is suitable for drilling and plunging.
- The wide main cutting edges allow multiple regrinding
- The delivery takes place in a stable plastic packaging
Made in Germany! This Solid Carbide Quadruple Flute Spiral Upcut End Mill with 4 positive spiral grooved cutting edges is made by PWWU Präzisionswerkzeuge Wurzen especially for the Onlineshop pwwu24.de.
If you should need such a Solid Carbide end mill with another diameter, another shank, with clamping surface or another working length, then this is no problem. PWWU Präzisionswerkzeuge Wurzen manufactures quickly and inexpensively your desired end mill made of solid carbide or HS - exactly fitting for your application.
Would you like to have your Quadruple End Mills reground?
Pwwu24 ToolGrinding original regrind for maximum tool Performance. Professional reconditioning service for your cutting tools. Information about our Quadruple Flute Spiral Upcut End Mill regrinding service.
- Do you have any questions concerning this product?
- Further products by PWWU Präzisionswerkzeuge Wurzen
wir setzen diesen Schlichtfräser mit 4Z für die Bearbeitung von glasfaserverstärktem Kunststoff ein und sind sehr zufrieden!