Mortise chain 10 mm C 55 DGL trapezoidal

Mortise chain 10 mm, pitch C = 13.7 mm with 55 double links suitable to cut trapezoidal mortises for windows bars

• This Mortise chain with a width of 10 mm and a pitch C = 13.7 mm with 55 double links is especially suitable for cutting  trapezoidal mortises for window bars. Suitable for mortises from 20 to 26 mm length.
• This Mortise chain is new and unused. However, it may show storage marks.
• With a slot width of 10 mm, the Mortise chain is intended for use on chain milling machines, chain mortisers or lock case mortisers.

 Scope of delivery: 1 piece of Mortise chain, width 10 mm, pitch C = 13.7 mm with 55 double links suitable to cut trapezoidal mortises for windows bars without any further accessories as shown in the picture!

Possible applications of the Mortise chain 10 mm trapezoidal shape with pitch C = 13.7 mm:

This Mortise chain for milling suitable to cut trapezoidal mortises for windows bars is indispensable for the reconstruction of historical wooden windows in accordance with the preservation order! The Mortise chain is also suitable for dovetail joints in the manufacture of furniture.

The small side "a" cannot be less than 20 mm, the difference between side "a" and side "b" cannot exceed 6 mm.

Technical details of the Mortise chain 10 mm trapezoidal shape with pitch C = 13.7 mm:

• Cutting width of the Mortise chain: Bs = 10 mm
• Chain pitch: t = 13.7 mm (type C small)
• For slot length: L = 20 / 26 mm
• Can be used for slot depths: Ds = 150 - 160 mm
• Number of double links: n = 55 DGL
• Width of the centre link: Bm = 4.0 mm
• Length of Mortise chain: Lges = 380 mm
• Minimum cutting speed: Vcmin = 250 m/min
• The optimum cutting speed is achieved at Vcopt = 360 m/min
• Order no.: S1006.72
• Delivery quantity: 1 pc. Mortise chain with trapezoidal shape and 10 mm cutting width
• Made in Germany
• Mortise chain pitch C 13,7 mm

Important instructions for use:

• Mortise chain tools for stationary machines must always be handled carefully.
• Observe the operating instructions of the machine manufacturer.
• Before starting the machine check the chain lubrication and the lubrication of the guide bar.
• Only use suitable lubricants according to the manufacturer's instructions.
• Have your tools and Mortise chains professionally reground even at low wear.
• Tension the trapezoidal mortise chain correctly. Make sure that the chain is correctly tensioned even during breaks in work. Relax the chain after work.
• Tip: You can best order the sharpening of your Mortise chains for trapezoidal mortises right here in our online shop.

Available only while stocks last!