Universal safety profile cutterhead 40 / 50 mm

Universal safety profile cutter head 40 / 50 mm, Z = 2 for profiling solid wood edges

Universal safety profile cutterhead 40 / 50 mm for universal mouldings of solid wood. Suitable for spindle moulders with manual feed!

Technical details of the Universal safety profile cutterhead 40 / 50 mm:

• Diameter: D = 114mm (without knives)
• Width: B =  50mm
• Bore diameter: d = 30mm (for shaft with 30mm diameter)
• Made of steel, Bronzed surface.
• Permissible speed range: 5100 - 7900 rpm

(Profilmesserkopf 40 / 50 mm, Głowica noża profilowego 40 / 50 mm)

Application: For universal mouldings of solid wood. Profiled knives and chip limiters must always be used in pairs. Suitable for spindle moulders with manual feed. Simple knife change due to the seated fitting bolt in the body of the moulder.

Design: Tool body made of aluminium, chip-thickness limitation, reduced recoil, equipped with SP rabbeting knives and chip limiters, positive locked on constant cutting circle. (SP = Alloy tool steel)

Contents of delivery:

• 1 piece safety profile cutter head 114 x 40/50 x 30 mm
• 2 pieces profile knife 40mm and 2 pieces chip limiter 38mm
• 2 pieces clamping wedge made of steel 38 x 25 x 13 mm
• 1 piece hexagon socket wrench 4mm
• 1 Instruction manual
• 1 cardboard packaging

The 40 / 50mm safety profile cutter head is suitable for profile knives and chip limiter with the following dimensions:

• Width of profile knives: B1 = 40 or 50 mm
• Width of the chip limiter: B2 = 38 or 48mm
• aximum profile depth: H2 = 19 mm
• Profile knife height: H = 46 mm
• Thickness of profile knives: T = 4 mm
• Diameter of holes: d = 6mm
• Distance between holes: a = 24 mm

Attention: Matching HSS special profile knives 40mm and chip limiter for the 40 / 50mm universal cutter head can be found here in the online shop!

Product description Safety profile cutter head 155 (114) x 40 / 50 x 30 mm:

2 identical profile knives are clamped into the cutter head together with the matching profiled chip limiters. For this purpose, one profile knife and one deflector opposite it are inserted into one of the two grooves worked into the cutter head in a tine shape. Then the supplied clamping wedge is inserted. There are fixing screws in the clamping wedges. When these are tightened, the clamping wedge is clamped between the knives and the knives and chip limiter are fastened. The clamping wedge is additionally pressed outwards by the centrifugal forces occurring during milling. This further increases the clamping force of the clamping wedge.

Important! Both profile knives 40 / 50 mm must point in the same direction of rotation. The rake face of the knife always points in the middle, in the direction of the clamping wedge.

The use of profile knives with suitable profiled chip limiter limits the chip thickness of the safety profile cutter head to 155 (114) x 40 / 50 x 30 mm. It is low-knock and therefore suitable for manual feed. Attention: This tool must not be used without a suitable profiled chip limiters.

• profile knives 40 mm and chip limiter
• profile knives 50 mm and chip limiter