HSS Spiral Milling Cutter 7x22x60mm S8

HSS upcut spiral end milling cutter D = 7 x 22 x 60 mm, Shank = 8 mm, 2 flute, HS Slot milling cutter!

Buy HSS upcut spiral end milling cutter D = 7 x 22 x 60 S8 in the Tools Onlineshop directly from the manufacturer!

(HSS Spiralfräser D = 7 x 22 x 60 mm, S8,  HSS Frez spiralny D7x22x60 S8)

The HSS upcut spiral end milling cutter D = 7 x 22 x 60 mm, Shank = 8 mm, 2 flute is a slot milling cutter, which is just as suitable for the hand router as for the stationary milling cutter. The manufacturer of the slot milling cutters is Präzisionswerkzeuge Wurzen. Here you can order and buy this end milling cutter directly in the Tools Onlineshop!

Technical data for HSS upcut spiral end milling cutter D = 7 x 22 x 60 mm, Shank = 8 mm, 2 flute

• Diameter = 7 mm
• Blade length = 22 mm
• Total length = 60 mm
• Shaft diameter = 8 mm
• Shaft length = 35 mm

This HSS upcut spiral end milling cutter is made of high quality HS (high speed steel) is suitable for milling grooves and rebates.

HSS upcut spiral end milling cutter D = 7 x 22 x 60 mm, Shank = 8 mm, 2 flute and end mills with spiral grooved cutting edges and pulling cut for better surfaces

• Article - No.: 1025.14
• EAN: 4056053250141
• HSS upcut spiral end milling cutter for processingin hardwood and softwood. Suitable for plastics as well as non-ferrous metals.
• The 8mm HSS slot milling cutter is right - hand twisted and right - hand cutting.
• Upcut means: the chips are guided upwards. This ensures a cleaner surface on the workpiece!
• TOP quality from German production of PWWU Präzisionswerkzeuge Wurzen.
• All end mills here in the Tools Onlineshop are manufactured exclusively for pwwu24.de!
• The HHSS upcut spiral end milling cutters are basic and flank cutting. Because the sharpened drill cutting edge enables drilling in.
• Wide cutting edges allow multiple regrinding.
• The HSS upcut spiral end milling cutters are always supplied in sturdy plastic packaging!
• The HSS end mills fit into every milling and milling machine with 8 mm collet, for example: Festool, Festo, Holz-Her, Makita, Bosch, Dewalt, Elu, Mafell, Metabo, AEG etc.

The cutting speeds with the twisted HSS upcut spiral end milling cutter D = 7 x 22 x 60 mm:

For the cutting speed vc when milling with the HSS end mill in the hand router or the stationary router, we also recommend the following guide values in the Tools Onlineshop:

• Plastics: 60 to 200 m / min
• Hardwood / softwood: 1000 to 2500 m / min
• Aluminium / aluminium composite materials: 100 to 400 m / min
• Non - ferrous metal: 80 to 160 m / min

The values are also valid for milling depths up to a maximum of two to three times the groove cutter diameter. This means that they apply when milling in the materials mentioned. However, other values are also possible depending on the specific properties of the material to be machined.

Please note, however, that you should never mill to full length with such a long end mill. The milling depth, on the other hand, should be a maximum of two to three times the groove cutter diameter. Otherwise there is a risk of tool breakage due to overload!