HSS Spiral Milling Cutter 6x22x60mm S6

HSS Upcut Spiral Slot Milling Cutter D6 x 22 x 60 mm S6 Z2 (up cut). Buy high quality HSS Spiral Milling Cutters made of high speed steel with 6 mm shank here in our Tool Onlineshop!

(HSS Spiralfräser D6x22x60 S6, HSS Frez spiralny D6x22x60 S6) 

HSS Upcut Spiral Slot Milling Cutters with 6mm shank made of high - quality high - speed steel have spirally twisted cutting edges. For this reason, these HSS Spiral Milling Cutters are ideally suited for milling grooves and milling pockets in wood, wood-based materials, plastic and non-ferrous metals.

The HSS grooving cutter made of high-speed steel has a pulling cut due to its spirally twisted cutting edges. It is right-hand cutting, right-hand turning and right-hand twisted. Routing tools with up cut mean: The chips are guided upwards out of the working area.

Technical Data of HSS Upcut Spiral Spiral Milling Cutter 6 x 22 x 60 mm S6

• Spiral milling cutter - Diameter: D = 6 mm
• Cutting length: l = 22 mm
• Total length: L = 60 mm
• Shank diameter: SD = 6 mm
• Shaft length: SL = 36 mm
• Material: HSS (High Speed Steel for milling wood, wood - based materials and plastics.)
• Origin: TOP - Quality from German production!
• Because the router cutters are manufactured by Präzisionswerkzeuge Wurzen, exclusively for pwwu24.de.
• Ground and flank cutting. The ground drill cutting edge enables drilling in.
• Sustainability: Due to the wide cutting edges, multiple regrinding is possible depending on the degree of wear.
• Packaging: The delivery takes place in a stable plastic packaging.

The HSS Spiral Milling Cutters fit into all routers and milling machines with 6 mm collets, among others: Festool, Festo, Holz-Her, Makita, Bosch, Dewalt, Elu, Mafell, Metabo, AEG, etc.

The cutting speed when milling with the HSS Spiral Milling Cutter made of high - speed steel:

The cutting speed is the speed at which the high - speed steel grooving cutter cuts the chips off the workpiece. Therefore, please do not confuse with feed speed or speed of rotation!

Info: The cutting speed for HSS slot milling cutters is calculated with the following formula:

vc = n * d * pi
vc = cutting speed in mm / min
n = Speed in 1 / min
d = Spiral milling cutter Ø in mm
pi = 3.1416 Circle number

For the cutting speed vc when machining with the HSS slot milling cutter, however, these rough guide values can also be assumed:

• Aluminium and aluminium composite materials: 100 to 400 m / min
• non-ferrous metals such as copper, brass, bronze: 80 to 160 m / min
• Plastic: 60 to 200 m/min
• Wood or derived timber products: 1000 to 2500 m / min

The values are valid for milling depths of two to three times the HSS slot cutter diameter when milling the above materials, for example. Other values are also possible depending on the toughness and strength of the material.
Attention: These are only approximate values to start with. Because every milling machine and every router behaves differently.