HSS Spiral Milling Cutter 8x22x60mm S8

HSS Spiral Milling Cutter D = 8 x 22 x 60 mm, shank 8 mm, Z2. Buy milling cutters directly from the manufacturer!

(HSS Schaftfräser D8x22x60 S8, HSS Frez spiralny D8x22x60 S8)

The HSS milling cutter is an end mill, which is suitable for the hand router as well as for the stationary router. The manufacturer of the end mills is Präzisionswerkzeuge Wurzen. Here you can order and buy this end mill directly in the Tools Onlineshop!

Technical data for the 8 mm HSS milling cutter for hand router and stationary milling machines

• Diameter: D = 8 mm
• Cutting edge length: l = 22 mm
• Total length: L = 80mm
• Shank - diameter: SD = 8 mm
• Shank - length: SL = 35 mm
• Flutes: 2 flutes, upcut

This HSS milling cutter made of high quality HS (high performance high-speed steel) is suitable for milling grooves.

HSS milling cutters with spiral fluted cutting edges and with upcut for better surfaces

• Item - Number: 1025.08
• EAN: 4056053250134
• HS Milling Cutter for milling in hardwood and softwood. Suitable for plastics as well as for non - ferrous metals.
• The 8mm HSS end mill is right - hand twisted, up cut.
• Up cut means: the chips are led away upwards. This ensures a cleaner surface on the workpiece!
• TOP quality from German production of PWWU.
• All end mills here in the Onlineshop are produced exclusively for pwwu24.de!
• The HSS end mills are face and flank cutting. The face cutting edge geometry with two centre cutting edges designed with a plunging facility
• Sustainability: Due to wide cutting edges multiple regrinding is possible.
• The end mills are always delivered in a stable plastic packaging!
• The HSS milling cutters fit in every milling machine and every milling machine with 8mm collet chuck, for example: Festool, Festo, Holz-Her, Makita, Bosch, Dewalt, Elu, Mafell, Metabo, AEG etc.

The cutting speeds with the twisted HSS milling cutter 8 x 22 x 60 mm S8:

For the cutting speed vc when milling with the HSS milling cutter in the hand router or the stationary milling cutter, we also recommend the following guide values:

• Plastic: 60 to 200 m / min
• Hardwood / softwood: 1000 to 2500 m / min
• Aluminium / aluminium composites: 100 to 400 m / min
• Non-ferrous metal: 80 to 160 m / min

The values are also valid for milling depths up to a maximum of two to three times the grooving cutter diameter. In other words, they are valid when milling in the materials mentioned. However, other values are also possible depending on the specific properties of the material to be machined.

Please note, however, that with such a long end mill you should never mill into solid material with the entire cutting edge length. On the other hand, the milling depth should be a maximum of two to three times the grooving cutter diameter. Otherwise there is a risk of tool breakage due to overload!