- Order number: S10118
Size | Artikel-Nr. | Preis | Menge |
---|---|---|---|
D=14mm, AL=25mm, l=95mm, L=140mm, S=14mm | S10118 | €158.93 * | |
D=16mm, AL=30mm, l=130mm, L=175mm, S=16mm | S10118.3 | €198.80 * | |
D=16mm, AL=30mm, l=95mm, L=150mm, S=16mm | S10118.1 | €168.77 * | |
D=18mm, AL=30mm, l=130mm, L=175mm, S=18mm | S10118.4 | €229.13 * | |
D=18mm, AL=30mm, l=95mm, L=150mm, S=18mm | S10118.2 | €193.59 * |
Solid carbide lock-case cutter 2Z upcut
Solid carbide lock-case cutter with 2 positive spiral grooved cutting edges for use in clockwise rotation, chip ejection upwards. For the production of lock-case and face plate cut-outs with stepwise feed in solid wood and board material and in plastic. Use in the chuck or adapter on the milling machine or CNC machine.
2-edged lock-case milling cutters are excellently suited when 3-edged tools chatter due to lower machine performance or deliver unsatisfactory milling results.
For the production of the tools we exclusively use high-quality finest grain carbide.
The milling cutters are equipped with 2 centre cutting edges and are suitable for drilling, ramping and circular immersion.
The working length marked AL in the second illustration is the maximum milling depth that a lock-case milling cutter can mill in one operation.
The maximum milling depth is marked with l in the illustration. This is the maximum groove depth that can be milled with this tool.
The lock-case cutter only has cutting edges in the area marked AL. Between this cutting area and the shank there is a round ground undercut. This area is designed in such a way that the milling chips are well transported upwards.
(VHW-Schlosskastenfräser 2Z pos Rechtslauf spiralgenutet, VHW-Frez skrzynkowy 2Z pozytyw prawostronny spiralnie rowkowany)
Specifications: Solid carbide lock-case cutter 2Z upcut:
- Diameter : D
- Total length: L
- Maximum immersion depth: l
- Shank diameter: S
- Shank length = L – l
- Number of cutters: Z2
- Helix angle: Positive
- N max: 18.000 1/min Clockwise rotation
- Tool body material: The milling cutter consists of high-quality finest grain solid carbide
- For the production of lock-case and forend cut-outs with stepwise infeed.
- Stable design, basic and flank cutting edge geometry
- The milling cutters are equipped with 2 centre cutting edges and are suitable for drilling in, inclined retraction and circular immersion
- Smooth shank according to DIN 1835 A without clamping surface (a clamping surface can be retrofitted if required)
- Chip ejection upwards
- Suitable for processing wood, chipboard, MDF, HDF and plastics
- Very suitable for use in CNC machines
- Made in Germany for pwwu24.de by Präzisionswerkzeuge Wurzen
- Wide cutting edges, thus frequent regrinding is possible
- Stable plastic packaging
Would you like to have your Lock-case cutters reground?
Pwwu24 ToolGrinding original regrind for maximum tool Performance. Professional reconditioning service for your machining tools. Information about our Lock-case cutters regrinding service
- Do you have any questions concerning this product?
- Further products by PWWU Präzisionswerkzeuge Wurzen